Корзина
Gloss and protection for concrete Atlas Delfin
When applied to the surface, it creates a wet concrete effect with a bright glossy, glossy finish.
Protection against moisture and UV rays
Consumption of 1 liter per 15-20 sq. m.
Packs of 1L and 5L
Color of liquid is white
No smell
Manufacturer Poland
ATLAS DELFIN Gloss for Concrete PROTECTIVE PROTECTOR FOR CONCETE (tiles, fences, monuments) PROTECTES DURABLY AGAINST WATER, OIL, FAT STREAMS
Gives the product a glossy surface !!!
APPLICATION
Atlas Dolphin protects concrete surfaces, stone and other surfaces with a porous structure, protects products coated with it from moisture absorption, oil stains, grease stains.
PROPERTIES
ATLAS DELFIN emulsion is frost resistant and can be used both inside and outside buildings. It is economical and very easy to use. ATLAS DELFIN is colorless. It gives products a delicate sheen and gives old, matte cladding a fresh look. Due to its great ability to penetrate into the top layer of tiles, it creates a strong protective layer on their surface. It has special impregnating properties (this also applies to joints) as well as anti-slip properties. The floor coating becomes more resistant to dirt, easy to care for. It withstands heavy loads and is resistant to all types of detergents. In terms of chemical composition, the protective coating is resistant and cannot be washed off. The surface impregnated with this product withstands temperatures from -20oC to +80oC.
SUBSTRATE PREPARATION
Clean the intended surface of residual concrete adhering particles and remove cement plaque and dust from the surface.
EMULSION PREPARATION
ATLAS DELFIN is produced as an emulsion ready for direct application. The emulsion must not be combined with other materials, diluted or thickened.
APPLICATION METHOD
Apply Atlas Dolphin Fluid undiluted to the substrate with a sponge or brush, in a thin and even layer. Do not leave puddles! After approx. 30 minutes on highly absorbent surfaces apply a second coat across the entire surface. Substrates can be used 24 hours after the emulsion has been applied. Seams are impregnated with ATLAS DELFIN liquid with a thin brush after they have cured for two weeks after they have been made.
EXAMPLE
On average, 1 kg of emulsion is used per 15-20 m2. Practical consumption depends on the degree of absorption and surface texture.
INSTRUMENT
Sponge or paint brush. The tool is washed with clean water immediately after use.
PACKAGING
Plastic containers: 1 L and 5 L.
STORAGE AND TRANSPORTATION
Emulsion should be transported and stored in tightly closed packages, in dry conditions, at plus temperatures.
Keep from overheating. Shelf life is 12 months from the production date indicated on the package.
WARNING
Keep away from children! If the emulsion comes into contact with the eyes, consult a doctor.
ТTECHNICAL DETAILS
Base temperature....................................... from +5oC to +25oC
Base use .................................... after 24 hours
Thickness of emulsion .............................................. 1,0 g/cm3
- Concentrate: Use 1000 ml per 15-20 sq.m.
- Packaging: plastic canister
- Weight, kg: 1L, 5L
- Application: Gloss for concrete
- Condition: New