Concrete varnish-acrylic impregnation for concrete Packing 1 l, 5 l, 10, 20 l

Wet StoneBF Acrylic impregnation for concrete,Ceramic products, fences, posts.monuments, paving tiles, balusters,covers for posts and fences.
When application on the concrete product creates a "Wet Stone" effect.
Descriptionacrylic impregnation varnish BF-Black Stone: Acrylicdeep penetrating impregnation with the effect"Wet Stone" effect
for mineralmineral surfaces with deep penetratingproperty into the micropores of concrete,
thatcreates a property that withstands intensiveabrasion stresses on the upperexploitable layer.

Assignment: Applicable,as an independent coating, givingThe effect of "Wet Stone", the gloss of the product,
Perfectsuitable for paving slabs,gutters, curbs, facade slabs,concrete fences,
posts, coversfor fences, parking stops,balustrade elements,
3D panels, otherconcrete products and naturaland artificial stone, brick 

Features/ Advantages: 

1. Gives the effect of "Wet stone"

2. Smoothes colorof product - masks cement contamination

3. Preservative properties- creates protection against moisture.

4. Doesn't dispose to efflorescence

5. Protects against ultraviolet rays

6. Strengthens and dust-free surface

Conditionsstorage conditions and expiration date: Storeand transported in a sealed containerat temperature from -10 to + 30 C in inaccessibleout of reach of children. Protect from fire,Heating appliances, direct sunlight.direct sunlight.

Shelf life: 24months from date of manufacture
Chemicalbasis:
Specialformulation of copolymers and a solution of acrylicresins, organic solvents andfunctional additives. The impregnation is readyready to use

Consumption: 1L per 5-8 m2 in one coat (depends onmaterial)

Methodapplication: Beforesurface must be thoroughly cleaned before application.
Carry outtreatment should be performed at temperatures between 0Cup to +25C, avoid direct sunlight on the treated area.direct sunlight on the treatedsurface.
Impregnant may only be appliedonly on dry material.Use a household (garden) sprayer,roller or paint brush.
After it is completely dry,You can apply a second coat to intensify the"Wet Stone" effect.
When  painting with a brush, it is recommended to apply the first and second coat crosswise.

Drying time: At+25C and 50% relative humidity - 18 hours
Techniquesafety: Wearpersonal protective equipment when handling impregnation
Useprotective clothing and a respirator.
Ifin case of contact with eyes, consult a doctor.doctor.

Attention!Do not pour residual impregnation into drains,ponds or the ground.
Empty containers and dryresidues can be disposed of asdemolition waste