Rubber stop for post “Pyramid”

Rubber top insert for one-sided concrete post

Weight 690-750 g

Size: Front Width x Depth x Thickness

120x125x30 mm

130x125x30 mm

150x120x30 mm

125x110x30 mm

120x120x30 mm

125x125x30 mm

145x125x30 mm

Rubber thickness 30 mm

Shore hardness A 50-65

Strength 5-6.5 MPa

Color black

Rubber characteristics for the limiter:

The limiter is made of wear-resistant high quality molded rubber RTI.

Heat, frost, acid and alkali resistant.

Technical rubber, resistant to heat, frost, acids, alkalis.

Usage:

insert the limiter for the swing post mold into the inside of the post mold by sliding it onto the slots and

set the required length.

In this way, the length of the post is adjusted on the groove side.

Recommendations for the operation of the rubber stopper:

A favorable storage environment for rubber is a dry and ventilated room up to +25 ° C with no

access to sunlight.

Extend the service life of the product can be excluding the ingress of oil products, acids, alkalis and other aggressive substances destroying rubber,

acids, alkalis and other aggressive substances destroying rubber.

For cleaning from concrete residues wash with water and for freshness of rubber treat with silicone.

* Please note that rubber stops/inserts are not universal and are only suitable for molds of a certain size.

for molds of a certain size.

Before ordering, please make sure that the dimensions of the post you have are the same as the dimensions of our rubber stop/insert.

rubber stop/insert.

If the pole form was purchased from us, it is necessary to determine its catalog number and see

the number of the rubber stop/insert with the same number.

* We manufacture rubber stops/inserts according to individual dimensions.