Plasticizer for concrete Master packed from 5 liters

Plasticizer Master for vibrocasting and concrete products and warm floors.

Concentrate for vibro-cast and low water content products
Packaging - 5 l 10 l, 50 l, 200 l;
Consumption -0.2-0.8 % of 100 kg of cement
Plasticizer Master is used in the production of all types of commercial concrete, in the production of concrete decorative products, especially in summer production conditions.
Additive is characterized by high plasticizing effect even at a low dosage.
Allows the production of concretes with mobility from P2 to P4;
Allows you to significantly reduce the cost of cement and produce concrete with low production costs;
Facilitates compaction and improves the appearance of concrete.
Provides easy pumping of commercial concrete by concrete pumps.
For highly workable concretes prevents segregation and water separation;
Increases the strength, water resistance and frost resistance of concrete products.
It doesn't slow down the hardening of concrete and allows for earlier stripping of the structure;
Additive does not contain chlorides
Additive Master - non-flammable and physiologically harmless, brown in color, odorless
Protect from heat above 60⁰С.
In case of freezing the additive must be thawed at 30⁰C and stir.
Freezing of the additive does not reduce its effectiveness.
Product is a non-combustible material.
In case of spillage or leakage additive, sprinkle the area with sand or wood shavings and dispose of at the incinerator.
Product must not enter the sewage system, surface or ground water.
In sealed plastic container can be stored for 1 year.